Big mass coils might need a stronger pre-heat to reach the
set wattage quicker. But your second, third, and so forth
consecutive draws do not.
Smart Boost allows you to set a custom pre-heat for these
first draws when the coil is cold. Consecutive draws (chain
vaping) will get a lower pre-heat power %.
Once you set your battery CDR value in the Tweaks section, G2 will notify you if the current power draws more Amps than your battery allows for safe use.
* CDR alert is based on an estimated calculation.
An automatic daily timed reset counter, Set the daily reset time for the Daily counter; it will automatically reset each day.
Optional – You can set your average room temperature for added accuracy if needed.
CWM - Constant Wattage Modulation - the power slowly reduced over time for a comfortable, soothing vaping experience.
Choose between 3s, 5s, 7s, and 10 seconds in length.
Smart curves allow you to manipulate power through time.
The curves are percentage-based and can be used globally on all coil types without additional adjustments.
With Auto Sense technology, the device will enter a 10-minute analyzing phase to check whether the coil resistance reached room temperature and locks it.
Before using temp control, you must register/lock the coil resistance while at its room (base) temperature state.
The Dynamic module allows for higher and lower temperature stripes, bringing better flavor while protecting from a dry hit. If you focus on maintaining the temperature limit, the Constant module will ensure the temperature will not bypass the set limit.
Before using temp control, you must register/lock the coil resistance while at its room (base) temperature state.
Locking the resistance AFTER usage while hot or above room temperatures lead to miscalculation and poor performance.
© 2010-2024 Copyright Dongguan Yihi Electronic Co.,ltd. All Rights Reserved. | 粤ICP备14098942号 | STARKAY
